QuadroBase v.1.0 Smart Home Controller/en: различия между версиями

Материал из wiki.quadrobit.com
Перейти к навигации Перейти к поиску
(Новая страница: «- QB Water-1 wireless water sensor»)
(Новая страница: «I2C contact interface (ZOG-POLO socket).»)
 
(не показаны 4 промежуточные версии этого же участника)
Строка 36: Строка 36:
 
Socket: 15EDGRC-3.5/3.81.
 
Socket: 15EDGRC-3.5/3.81.
  
−
Контактний інтерфейс I2C (роз’єм ZOG-POLO).
+
I2C contact interface (ZOG-POLO socket).
  
 
Wi-Fi:
 
Wi-Fi:
Строка 75: Строка 75:
 
- QB Water-1 wireless water sensor
 
- QB Water-1 wireless water sensor
  
−
– бездротовий контролер QB POWER-1 з моторизованим водопровідним краном QB VALVE-1,
+
- QB POWER-1 wireless controller with motorized water volve QB VALVE-1,
  
−
– бездротова розетка QB socket-1.
+
- QB socket-1 wireless socket.
  
 
   
 
   
  
−
Перелік пристроїв, що підтримуються Контролером, постійно оновлюється та розширяється.
+
The list of supported devices by the Controller is constantly updated and expanded.
  
−
Актуальний перелік сумісних пристроїв представлено на сайті: http://quadrobit.com/.
+
An up-to-date list of compatible devices is available at http://quadrobit.com/

Текущая версия на 11:40, 28 марта 2019

Prescription

QuadroBase v.1.0 controller (hereinafter –Controller) is the central hub of smart home systems. The Controller provides connection and integration with different types of devices like sensors, detectors and executing devices. These devices can be manageddirectly or remotely using the Controller.

The Controller allows integration with http://quadrobit.com/user portal.

Model: QuadroBase v.1.0;

Firmware version: 0.8;

Voltage: 5 V;

Current: ≤ 2.0A;

Communication:

Radiofrequency (RF): 

   -Frequency range: 240-930 MHz;

-Presets: 433,92MHz, 315MHz; -Wireless distance (open space): up to 50 m; -Supported RF protocols: PT2260, PT2262, PT2264, EV1527, и др.; -Supported RF modulation:ASK (FSK, GFSK, OOK -optional); -RF receiver sensitivity: -121dBm; -RF transmitter power: 20dBm; -Antenna resistance: 50Ohm.

Infrared (IR) transmitter/receiver.

eBUS: 

   Voltage: 8-24V

Speed of communication: 2400baud Modes: master, slave. Socket: 15EDGRC-3.5/3.81.

I2C contact interface (ZOG-POLO socket).

Wi-Fi: 

   Wi-Fi 802.11 b/g/n, 2,4 GHz;
   Mode:  Station (client), Access point;
   Max. power: 19,5 dB (89 mW).

GSM: 

   Frequency band: EGSM900, DCS1800, GSM850, PCS1900;

     Radiation Power DCS1800, PCS1900: 1W;      Power of radiation GSM850, EGSM900: 2W;      Network standard: 2G;      Sending and receiving GPRS data;      Support for SIM cards 1.8V and 3V.


Number of connected devices: up to 100.

Number of connected QuadroMeteo weather stations: up to 16.

Temperature: 0 ° C to 70 ° C.

Humidity: up to 95% (condensation is not allowed).


List of devices that can be connected to the QuadroBase v.1.0 controller:

- QuadroMeteo-1 wireless weather station,

- QB PIR-1 wireless motion sensor

- a wireless door openers / windows QB OPEN-1,

- QB Water-1 wireless water sensor

- QB POWER-1 wireless controller with motorized water volve QB VALVE-1,

- QB socket-1 wireless socket.


The list of supported devices by the Controller is constantly updated and expanded.

An up-to-date list of compatible devices is available at http://quadrobit.com/

Источник — http://wiki.quadrobit.com/index.php?title=QuadroBase_v.1.0_Smart_Home_Controller/en&oldid=298